All posts by fitpackindia

Double Chamber Vacuum Packing Machine

Vacuum is done to increase shelf life of a product. The machine extract all the air present in the pouch. It eliminates chances of micro organism growth in the pouch with enables products to have longer shelf life.  The machine is useful for dairy, spices, tea and products with short shelf life or with high aromatic value.

Special Feature :

Fully S.S. Covering body, Speed is more than ordinary vacuum packing machine.

There is an optional Gas flushing attachment.

HVC-610S/2SB HVC 510 S/2B
Voltage (V/Hz) AC 380/50 AC 380/50
Motor Power (W) 1100 1800
Sealing Power (W) 1000 600
Ultimate Vacuum Pressure (Kpa) 1 1
No. of Sealing Bar forEach Chamber 2 2
Sealing Length (mm) 610 510
Sealing Width (mm) 10 10
Chamber Dimension(L×W×H) (mm) 720×550×150 610*550*150
Vacuum Pump Rate(m3/h) 40 40
Material of Vacuum Chamber Stainless steel Stainless steel
External Dimensions(L×W×H) (mm) 1485×735×930 1270*735*930
Net Weight (Kg) 240 220

 

Deep Chamber Vacuum Packing Machine

The machine has a deep chamber to vacuum pouches in a brick/box shape form. This brick shape forming enables vacuum pouches to stack properly, fit in the outer box properly and it gives a good looking pouch. This machine is useful for flour, dry-fruits, spices, tea and products with low shelf life.

 

Parameters: VQ 600T
Voltage (V/Hz) AC 380/50
Motor power (W) 1100
Sealing Power (W) 900
Ultimate Vacuum Pressure 1
No. of Sealing Bar 2
Sealing Length (mm) 600
Sealing Width (mm) 10
Vacuum Pump Rate (m3/h) 40
Chamber Dimensions (L×W×H) (mm) 700×620×180
Material of Vacuum Chamber Stainless Steel
External Dimensions (L×W×H) (mm) 760*770*970
Net Weight (Kg) 150kg

 

Carton Stretch Wrapping Machine

Carton Stretch Wrapping Machine

TECHNICAL SPECIFICATIONS:

STANDARD EQUIPMENT:

TURN TABLE                               : 750 mm.

MAXIMUM LOAD HEIGHT           : 500 mm

MAXIMUM LOAD WEIGHT          : 80 Kgs.

Length Of the Machine                 : 1500 mm

Height Of MACHINE                    :   700 mm( Working height )

SPOOL CARRIAGE                      :  Power Roller Pre Stretch Carriage

With Pre-Stretch Ratio adjustable up to 250 %

(Depending upon Film Quality).

Havells/Altra AC Motors ½ Hp 2 motors

Delta AC Drives.

 

UTILITIES REQUIRED:

STANDARD VOLTAGE: 220V 1PH 50 HZ.

POWER REQUIREMENT: 1 KW.

Air Compressor If required to be attached at your cost.

 

GENERAL CHARACTERISTICS:

The system shall consist of three main constituents ie.,

  1. Turn Table -For rotating the loaded roll during film wrapping with ½ Hp motor
  2. Powered Pre Stretch Unit with ½ Hp motor

iii) Spool Carriage for applying the required stretch to the film during the process of

wrapping.